Epoxy Floor Coatings

ESIS Epoxy Floor Coatings provide protection to concrete and wood floors, garages, gymnasiums and playground areas.Not only for the purpose of safety issues, but a good floor coating is desired for the sake of appearance and to increase the life of the floor. Cracks in Concrete Flooring can cause slips and falls. Wet and otherwise slippery floor surfaces can also contribute to injuries resulting from falls. Oil and chemical stains make floors unsightly in appearance. And although concrete is considerable very durable, it can be susceptible to erosion if not protected with a ES make Epoxy floor coating.

There are two main types of floor coating, Epoxy coating and urethane. Epoxy floor coating is very sturdy, but it will still be comfortable to walk on. It is usually used in garages and basements. Urethane Epoxy Floor Coatings is a flexible, cushioned feel to them and are generally used in gymnasiums, playgrounds and exercise areas. Epoxy Floor coatings are chemical resins that are melted & applied to a pre-prepared surfaces & then allowed to cure or harden for approximately 6-12 hours.

Less common & less stable, but also in use as a durable floor coating is epoxy paint. Fluoropolymer based floor coatings offer special protection against soil, chemicals, extreme weather conditions & have flame retardant abilities. This coating might be used in areas that are frequently exposed to industrial elements.

A concrete floor is prepared for coating application by cleaning it with an acid wash mixture of 10% muriatic acid and water and then completely rinsing. A wood floor is prepared by cleaning the floor, sanding it and then vacuuming it. A damp mop is then run over it to open the wood fibers up to accept the coating. There should be no harmful fumes during application, because epoxy coating is a water based product. Floor coatings can be applied professionally or if you desire, there are floor coating kits available for the do-it-your-self.

Maintaining the strength & appearance of your floor coating is simple. It will promote the life of yourfloor coating if you keep the floor as clean as possible, not allowing stains or chemicals to sit for long periods of time. Also, salt chunks can do some scratching damage if allowed to sit on the floor and be dragged around by the tires of a vehicle or heavy pieces of equipment. Sweeping the floor regularly and washing it with a vinegar and water mixture will preserve its appearance for a long time. Floor coatings are considered lifetime products, however, if the floor treated receives very high traffic or a lot of abuse, then usually in about 10 years, you may need to apply another coat. Occasional polishing will also contribute to the life of your floor coating.

Floor coatings come in a variety of colors and thicknesses depending on the location where it will be applied. You might choose a light color to brighten up a basement. Other colors available are darker solids, quartz and granite color schemes.

Sort By:  
Epoxy Floor Coat Primer EFTC 4001
$0.00
Polyurethane Epoxy Floor Coating
$0.00
SLG Epoxy Floor Coat EFTC 4003 ( 0.50 mm)
$0.00
SLG Epoxy Floor Coat EFTC 4003 ( 2 mm)
$0.00
SLG Epoxy Floor Coat EFTC 4003 ( 1 mm)
$0.00
SLG Epoxy Floor Coat EFTC 4003 ( 3 mm)
$0.00
SLG Epoxy Floor Coat EFTC 4003 ( 4 mm)
$0.00
SLG Epoxy Floor Coat EFTC 4003 ( 5 mm)
$0.00
SLG Epoxy Floor Coat EFTC 4003 ( 6 mm)
$0.00
Epoxy Floor Coat Primer EFTC 4001 (EFTC 4001)
ESIS, the Manufacturer, Exporter & Importer and Suppliers of "Epoxy Floor Coat Primer" binder for Epoxy Protective Floor Coatings. We provide and Supply High Quality and High Grade of Epoxy Floor Coat Primer binder for Epoxy Protective Floor Coatings.
Epoxy Floor Coat Primer EFTC 4001
$0.00
PU Epoxy Floor Coat EFTC 4002 (EFTC 4002)
ESIS, the Manufacturer, Exporter & Importer and Suppliers of "PU Epoxy Floor Coat " for interior floor Protection and decoration. We provide and Supply High Quality and High Grade of PU Epoxy Protective Floor Coatings. PU Epoxy Floor Coat is Polyurethane based Epoxy Floor Coating.
Polyurethane Epoxy Floor Coating
$0.00
SLG Epoxy Floor Coat 0.50 mm (EFTC 4003-0-05MM)
ESIS, the Manufacturer, Exporter & Importer and Suppliers of "SLG Epoxy Floor Coat 0.50 mm" for interior floor Protection and decoration. We provide and Supply High Quality and High Grade of SLG Epoxy Floor Coat 0.50 mm Protective Floor Coatings. SLG Epoxy Floor Coat 0.50 mm is a Self Levelling Epoxy Light Duty Floor Coating, ( Epoxy Resin + Hardener ) 2 component solvent free pigmented epoxy resin based flooring system.
SLG Epoxy Floor Coat EFTC 4003 ( 0.50 mm)
$0.00
SLG Epoxy Floor Coat 2 mm (EFTC 4003-02MM)
ESIS, the Manufacturer, Exporter & Importer and Suppliers of "SLG Epoxy Floor Coat 2 mm" for interior floor Protection and decoration. We provide and Supply High Quality and High Grade of SLG Epoxy Floor Coat 2 mm Protective Floor Coatings. SLG Epoxy Floor Coat 2 mm is a Self Levelling Epoxy Medium Duty Floor Coating, ( Epoxy Resin + Hardener ) 2 component solvent free pigmented epoxy resin based epoxy medium duty flooring system
SLG Epoxy Floor Coat EFTC 4003 ( 2 mm)
$0.00
SLG Epoxy Floor Coat 1 mm (EFTC 4003-01MM)
ESIS, the Manufacturer, Exporter & Importer and Suppliers of "SLG Epoxy Floor Coat 1 mm" for interior floor Protection and decoration. We provide and Supply High Quality and High Grade of SLG Epoxy Floor Coat 1 mm Protective Floor Coatings. SLG Epoxy Floor Coat 1 mm is a Self Levelling Epoxy Light Duty Floor Coating, ( Epoxy Resin + Hardener ) 2 component solvent free pigmented epoxy resin based flooring system.
SLG Epoxy Floor Coat EFTC 4003 ( 1 mm)
$0.00
SLG Epoxy Floor Coat 3 mm (EFTC 4003-03MM)
ESIS, the Manufacturer, Exporter & Importer and Suppliers of "SLG Epoxy Floor Coat 3 mm" for interior floor Protection and decoration. We provide and Supply High Quality and High Grade of SLG Epoxy Floor Coat 3 mm Protective Floor Coatings. SLG Epoxy Floor Coat EFTC 4003 ( 3 mm) is a Self Leveling Epoxy Medium Duty Floor Coating, ( Epoxy Resin + Hardener ) 2 component solvent free pigmented epoxy resin based flooring system.
SLG Epoxy Floor Coat EFTC 4003 ( 3 mm)
$0.00
SLG Epoxy Floor Coat 4 mm (EFTC 4003-04MM)
ESIS, the Manufacturer, Exporter & Importer and Suppliers of "SLG Epoxy Floor Coat 4 mm" for interior floor Protection and decoration. We provide and Supply High Quality and High Grade of SLG Epoxy Floor Coat 4 mm Protective Floor Coatings. SLG Epoxy Floor Coat EFTC 4003 ( 4 mm) is a Self Leveling Glossy Epoxy Heavy Duty Floor Coating, ( Epoxy Resin + Hardener ) 2 component solvent free pigmented epoxy resin based Heavy Duty Epoxy flooring system.
SLG Epoxy Floor Coat EFTC 4003 ( 4 mm)
$0.00
SLG Epoxy Floor Coat 5 mm (EFTC 4003-05MM)
ESIS, the Manufacturer, Exporter & Importer and Suppliers of "SLG Epoxy Floor Coat 5 mm" for interior floor Protection and decoration. We provide and Supply High Quality and High Grade of SLG Epoxy Floor Coat 5 mm Protective Floor Coatings. SLG Epoxy Floor Coat EFTC 4003 ( 5 mm) is a Self Leveling Glossy Epoxy Heavy Duty Floor Coating, ( Epoxy Resin + Hardener ) 2 component solvent free pigmented epoxy resin based flooring system.
SLG Epoxy Floor Coat EFTC 4003 ( 5 mm)
$0.00
SLG Epoxy Floor Coat 6 mm) (EFTC 4003-06MM)
ESIS, the Manufacturer, Exporter & Importer and Suppliers of "SLG Epoxy Floor Coat 6 mm" for interior floor Protection and decoration. We provide and Supply High Quality and High Grade of SLG Epoxy Floor Coat 6 mm Protective Floor Coatings. SLG Epoxy Floor Coat EFTC 4003 ( 6 mm) is a Self Leveling Glossy Epoxy Extra Heavy Duty Floor Coating, ( Epoxy Resin + Hardener ) 2 component solvent free pigmented epoxy resin based flooring system.
SLG Epoxy Floor Coat EFTC 4003 ( 6 mm)
$0.00
Per Page      1 - 9 of 9
  • 1

Our Speciality Prouduts

Concave Liner Mantle Terex
Concave Liner Mantle Terex
 
$0.00
Concave Ring CH660 Sandvik
Concave Ring CH660 Sandvik
 
$0.00
Crusher Backing Compound 25Kg
Crusher Backing Compound 25Kg
 
$0.00
Crusher Backing Compound 8 5Kg
Crusher Backing Compound 8.5Kg
 
$0.00
Crusher Backing Compound 10Kg
Crusher Backing Compound 10Kg
 
$0.00
Crusher Backing Compound 10Kg
HP Crusher Backing Compound 8.5Kg
 
$0.00
Manganese Steel Concave 01
Manganese Steel Concave
 
$0.00
Manganese Steel Mantle 02
Manganese Steel Mantle
 
$0.00